Search results

  1. Norm12345

    RCA to XLR confusion, help me figure this out...

    Ok, First of all., I should correct myself that the pin assigment I said in my original post was not correct Pin 3 is the bottom center pin, pin 2 is on the left and pin 1 is on the right... There's 3 wires... Black, clear and shield... Originally it was wired like this,... Pin 2 was the shield...
  2. Norm12345

    RCA to XLR confusion, help me figure this out...

    crap, I thought it would of been just as simple as swapping pin 1 and 2, but I was wrong... I swapped them and now I get Tip + -> pin 2 Ti[p - -> pin 3 sleeve shied -> pin1 would this work using the RCA pre-out sub jack into a power amp?
  3. Norm12345

    RCA to XLR confusion, help me figure this out...

    So, I've decided to use my JL 12W7 subwoofer for my hometheater instead of having it in a "waking up the neighbours car". I tried using my Yorkville AP4040 amplifier, but that didn't work, since its only a 4ohm amp and the JL is a 3 ohm speaker... Anyhow, long story short, I ended up buying a...
  4. Norm12345

    Using a JL12w7 (3ohm) with 4 ohm Power amp

    ok, found out what theile and small is ;) sorry, still kind of new at the AV game... I was actually looking for that parameter name in this list, didn't know this collection of parameters was called that... Free Air Resonance (Fs) 27.2 Hz Electrical “Q” (Qes) 0.514 Mechanical “Q” (Qms) 7.807...
  5. Norm12345

    Using a JL12w7 (3ohm) with 4 ohm Power amp

    ok, lets try the link again... http://www.jlaudio.com/12w7-3-car-audio-w7-subwoofer-drivers-92112
  6. Norm12345

    Using a JL12w7 (3ohm) with 4 ohm Power amp

    ok, lets try the link again... http://www.jlaudio.com/12w7-3-car-audio-w7-subwoofer-drivers-92112
  7. Norm12345

    Using a JL12w7 (3ohm) with 4 ohm Power amp

    try the link again... http://www.jlaudio.com/12w7-3-car-audio-w7-subwoofer-drivers-92112
  8. Norm12345

    Using a JL12w7 (3ohm) with 4 ohm Power amp

    Humm... can't seem to find those parameters... Here's the link to product specs... maybe its called something else?
  9. Norm12345

    Using a JL12w7 (3ohm) with 4 ohm Power amp

    Humm... can't seem to find it in the specs... here's the link tot the specs... http://www.jlaudio.com/12w7-3-car-audio-w7-subwoofer-drivers-92112 Not sure if it might be called something else...
  10. Norm12345

    Using a JL12w7 (3ohm) with 4 ohm Power amp

    ok, that setup did not work :( Bit the bullet and bought a used Crown CE4000 that should do the trick... waiting for shipment... Also, if its worth mentioning... right now its in a sealed box... I think for the room size, I'll have to build a custom ported box... Playing around with some design...
  11. Norm12345

    Using a JL12w7 (3ohm) with 4 ohm Power amp

    Hi everyone, This is my first post here... but I had a question that I can't find a clear cut answer to... I got a great deal on JL 12w7 in a sealed box a while ago from a friend of mine, originally this was going to go in car, but I spent the money on some good component speakers instead and I...
Top