Search results

Ok so I have figured out that it has something to do with using the internet radio system. I use the Pandora on the machine and when I do it locks out the remote control through the network system until you turn it off manually. Cycle power again manually, then from the off I can use the remote...

The Harmony one is just a IR controller. Unless the outlet adapter can receive IR they are not really compatible. If the adapter can be switched to IR then you can get and IR repeater that so that you don't have leave the cabinet open to hit the adapter with line of site. Plenty of products...

TV/VCR are though for universal remote programming. My experience is that you will have better luck programming the remote to work a VCR than a TV. The power will usually work and changing channels (not that you need that with box), may even switch inputs. Problem is it didn't always do volume...

Cheapest would be to hook up the computer itself to the system. For now get to input then use mouse and keyboard to control. Always a way to hook it up to a system just might need some adapters, but just depends on the machine. After that you can use controls for the computer. Cost on that...

I too am an installer and big fan of the Control4 platform. I would agree with the other posts that you need to make sure you have good communication with the product, it will work through any decent router that you probably already have. I have found more issue in programming and installers who...

From all the tests that you ran, you have eliminated a lot of possibilities. You have effectively somewhat eliminated the cable, the TV, and the receiver. To me it seems you have lost some auto configuring of resolution or some other setting in the receiver or the TV. Once you have verified...

I have just recently put in a Onkyo TX-NR1007. I have used a Control4 system for quite a while to run my systems. With this receiver I thought it would be nice to control it through the network. It works for about 2 or 3 days then stops. I was just wondering if anyone else is trying the network...

My thoughts as I read your post were taken to resolution as you touched on at the end. With the power outage there certainly could have been damage done, but could also be just a settings thing too. Depending on the hit and how long the power was out the settings would go back to a default...