Search results

I am having a tech come out and check it not a isf tech but a regular tech. He might do a e focus on it and stuff. One thing is for sure that I have noticed is that my bright settings on the tv when i got it was at +6 and with time it is now at +18 through +22. This is calibrated via avia. So...

every year I have a guy come over and he does maintenance on the tv. DO they re focus the electronic guns..

i feel liek the picture is fuzzier now than it used to be. To get the crisp and clear look i have to move back even further

does the electronic focus drift on direct view tvs over time and if so can a tweeter repair tech fix it. How can they fix it.... From far away the picture looks sharp and clear from closer it starts looking less crisp and more washed out.... Before from the same distances everythign was perfect

I have a 3 year old Panny 34 wx50 hdtv and ive noticed that the pq is not the same as when i bought it. I remeber the hd picture on this tv used to be crisp and real clear. Now I notice that the picture seems a bit more grainy and the picture lacks some depth from how it used to be. I can see...

WHat I have under my cneter is a little piece fo foam to tilt it down. Does anyone know if putting a small piece fo foam near the back of the center affect sound quality

Ok I have a question if I run the ypao and set the pq can i go in to the the geq and make some changes to it and then go back to the pq to see if I have set the geq to sound better than what the ypao set my pq at. By me trying to change the values of the geq, if i go back to pq will it still...

I think most people use flat. Has anyone tried high to see if they hear a difference... I have cc370 center and paradigm mini monitors as mains and atoms for rears. My rears are lesser qualities than my mains but I find that the flat setting works pretty good . Can anyoen try the flat settign if...

how about tivo can you add tivo to record sd channels and off the air with voom

What type of distortion did you hear. What did it sound like did you press yoru ears agaisnt the speaker and what did you hear. Why would you frwak out if you damaged yoru speakers did you really crank it up so high to approximatley 80-90 percent of the receiver volume. DO you have your speakers...

I have Mini Monitors as Mains and cc370 center and atoms for rears and to me the atoms do a very good job as rears for mini monitors. I bet Mini Monitors for rears would be much better but I have heard that you cant go wrong with atoms in the rears if you have mini montiros and cc370 as yoru...

Hey Cary P. I recently bought a cc370 PAradigm center and the tweeter opened up after 2 days the dealer stated that it was a factory defect. I also have a question what tweeter problems were you having and how did you identify this. How does one know if there tweeter is dmaged what does on...

On top of my hsu vtf2 bottomling out when it was runnign hot, I tiday noticed when switching from dvd player to my sattelite from direct tv and when i had it low my sub light turn red. When i went to a music channel that had some bass it was still red and didnt turn on until i raised the volume...

the bass rattles my house it just happens in that sene but i havet tried like 20 ther movies so...

the popping sound was like if the woofer was hitting somethign like the stops or something. Turst me i get plenty of base in the room. My sub was running like 20+ dbs higher than my speakers and i had my sub sounding like if there was a rocket in my house. Question why should it be in max output...

it blows it away offcourse... it sounds thighter and lower the infintiy sounds lighter and boomier. trsut me i had the swith in the back flipped correctly and my room is 15x12 with 12 foot ceilings and yes there are openings to the hall way and to the dining room.... Should i claibrate it closer...

so your saying that the vtf2 can only go as loud as it can before it bottoms out. SO tell me why did my cheap infinty 12 inch driver never bottom out. Actually in max extension that scene at the loudness i like it does not bottom out. The sub can get very loud like in star wars phantom menace in...

Ok I have tried the hsu demo disc and i have tried it on both max extension and maximum output. I plug the 1 port with max extension and unplug for max output. In the demo disc on max extension and the sub set to volume level to about half to see how this sub sounds it does not bottom out but it...

well you can go back and fourth from the peq and geq in the manual setup and you can hear the difference that the peq has made comapared to the geq settign which is all at 0. One thing is how do you lower the sound levels that way when i run the ypao i make sure it does not dmage any of my...

I just need to try to warm up my sound as i feel the low dettign has made my sound to bright. I remember when i got my receiver 3 days ago with out the ypao it sounded great now i want to go back to that or a settign that is more on the warm side

well the guy looked and open the speaker and he said that the tweeter opend up which is a defect from Paradigm. Even though the test tones were so loud that i was like oh i blew the center. anyways I finished completion of the ypao and i tried it with the low setting and for soem odd reason now...

well i just checked all my speakers and there ok other than the center when i run the test the center does not even do the whippign noise it does a low thump and the ypao gives me a error trust me guy i heard it blow. The thing is that i had my speakers through a spl meter i had them set at a...

did the ypao test and it went so loud it blew my center what the hell i just bought all this 3 days ago will they return my speakers for me. Shoudl i tell them that when i connected the center sounded very horrible and flat. WOudl you take all 5 speakers back and see if they return them for all...

i did the ypao test and it went so loud it blew my center what the hell i just bought all this 3 days ago will they return my speakers for me

is it better to go to the eq settign manually and leave all the readings at 0. I just want it to sound the best and now im paranoid because i ran the ypao in flat setting and i dotn know if it sounded better before. I think low perhaps sounds a bit better i just want for soem of you to explain...

Ok I just ran the ypao function but theres flat,front,low,medium,high Which one of these do you think will work best I have Paradigm Mini Monitors,cc370 center and atoms for rears I have a 15x12 room with 11-12 foot ceilings a tad bright if you know what i mean. What settign would give me a more...

guys I just want to know in the ypao function that what is usually the best setting flat,low,high,fronts. Which one should i try . What does low do and flat do . for a 15x12 room with a 12 foot vaulted ceiling which one should be better.

Ok i just got this receiver and have yet to run the ypao . I calibrated the system manually and set the levels and distance all correct. Now when doing the auto ypao im a little confused in the option to pick your eq. Theres flat,front,low , high ect. What is the best option here or is it better...

so my question is have you used the auto ypao and if so is it better you think to choose a eq option like fronts ,flat,low,high ect... Also when you do the ypao does it mess with the geq 7 band if so is it best to not let the auto mess with this. I am going to run the ypao tomorrow so i need to...

flat is what . what does flat do and skip what is skip. I have heard that sometimes if you let the auto choose the best one for you that it sometimes messes with your front and tames them down to the point that they sound dull. Thats why I want to make sure it doesnt do that for me