Kevin, Thanks for the suggistions. i could use more clairification. I do have optical running from the DVD to receiver. And the hiss occurs with only the amps connected, although very little. The hiss gets louder when the RCA is connected to the receiver. Remember the cable box is not...
Along with test outlined above I did this: I disconnected the RCA cables from the amp,(no other component connected, dvd, cable box all diconnected) and with the amps on there is a very, very slight, what I would call hiss. Only heard through the tweeter. Then I reconnected the RCA to the amp...
Using the Kenwood VR-6070, Denon DVD-2900, Cable Box I have loud buzz or hiss or hum on my VMPS RM2. I have tried many remedies and none have worked. Like dedicated line, Rat Shack filters, unplugging everything. Anyway my question for those who have the Kenwood 6070 have any of you...
It is difficult to find reviews or owner's opinions on Legacy speakers. It it that they are to expensive? I would sure like to hear what owners think about them. Thanks. Clyde
I am looking for a place around Tampa. Fl. or on the internet to purchase Mirage OM9, OM-C2 and OM-R2. Has anyone found great prices any where? Thanks for your help. Clyde
I have been looking for a new set of speakers and have read a little, and I mean little because I haven't found much, about the following speakers. Does any one have these or audition these makes? If you bought them can you tell me where? And of course what are their good/bad points...
James,Marc Thanks for the info. Why I ask is I have listen to the Paradigm Studio 60's and 100's. I didn't like the 100's. The 60's had more detail IMO. I see, in this case, going to the bigger ones is not necessarily the best option for me. And the 60's I was told were more efficient than the...
Has anyone listened to the QX9 and compared them to the QX10? I wondered if the major difference was just a little less bass? Does the QX9 have a higher efficiency? I wonder if it the same difference as seen in the Paradigm Studio 100 and 60's. Clyde
Can one run the Dahlquist QX10 which is 4 ohms, with the Kenwood VR6070 which is 6 ohms, or would I need an additional amp? Is any one running QX10's with a receiver? Thanks. Clyde
Is an amplifier used to just add volume? Would a 100 watt/ch receiver give good audio to most speakers? (Examples Paradigm Studio 60, Dahlquist QX10, Rockets 710, PSB Silver Stratus or Swan 6.1.)And if these speakers need more power than the 100 watt/ch receiver can produce would one use, for...
IMHO I felt that the Paradigm Studio 60 sounded better than the 100's. I was looking at the Q10's but if they are simular to the Paradigm 100's I would not be happy.
I am looking for a universal player. I have found these: Yamaha DVDS2300 $820. http://www.soundandvisionmag.com/art...ber=1&preview= Marantz DV8300 $1400. http://www.soundandvisionmag.com/art...article_id=301 Onkyo Intera DPS 8.3 $1000. http://www.federalstereo.com/indpdvdplayt.html...
ManojM
Thanks for the reply. I'll look up your suggestions.
Clyde
I found opinions here on the 963
AVForums.com search for Philips 963 look for thread GOT MY REPLACEMENT 963 NOT IMPRESSED
Here is another interesting dvd sacd player
Onkyo DPS-8.3 THX Ultra Certified Progressive Scan...
Has anyone connected the Audio Authority 1154 to the Kenwood VR6070? Why I ask is that when I make the connections,(DVD,Cable Box to the AA for video,audio from the same components to the AA, and audio out to the receiver)the only way I get sound from the surround speakers is when the input is...
I had problems connecting components to my new Kenwood VR6070. After reading the information here I think the Audio Authority 1154 is what I need. Bough it last week. Should be here by Wed. Thanks for the info. Clyde
Bob Video 3= optical digital CD/DVD = optical digital Monitor= optical digital Video 2= Coaxil DVD 6CH= coaxil I did find "alternative remote mode key" which might be a way of assigning a component to a different input. I'll check. Thanks for the help
Fantastic job Jeremy. When one is uninformed as I am is just amasing what people like you know. I have had a simular problem and copied a previous post below. I have played around with set up for a month now and still don’t think it’s right. Can any one help? I have a Hitachi 53SDX20BB high...