Hi Leonard I made one of these babys a while ago and couldn't be happier with how it sounds for use when watching movies. What are your impressions of the new sub? Stuart
I also used a 1/2" sheet of MDF with frames painted black for the sides going all the way to the floor to support the weight then bolted into the existing window frame with 90 degree brackets, painted with some flat white paint with a little bit of grey mixed in, certainly not rocket science but...
Hi all looking for some advice on building a duel shiva transmission line sub, I'm currently running a Shiva 142ltr EBS as well as a 88ltr sealed Shiva, and I am looking for a new project. I've come across a couple of sites regarding TL's and they have really got my interest up, I am now...
These are up for grabs on EBay OZ , anybody care to voice an opinion as to what they possibly were designed for, or as to how they would perform in a home theatre setup? They certainly look like they won't be shy in the bass department. http://cgi.ebay.com.au/ws/eBayISAPI....category=14993
Nice one Russell Thats a great sub you have built, I have had the same for a few months now and run it in conjunction with a sealed 88 litre shiva. Its bass heaven on a budget
I haven't tried a TL either but if she who must be obeyed agrees maybe another Sub! Currently running a 142 litre EBS along with sealed 88 litre shivas, getting heaps of grunt across the board now. How do you find the response with the TL ?
I've had a bit of a search through the forums to try to find the answer to this one but with no luck ! Can somebody please help with this one ? I am not satisfied with the PVC port that Im using on an EBS 142 litre shiva and have managed to locate here in OZ finally a 4"flared port, question...
Hi All Looking for opinions on whether you think this Amp (Rotel Power amp model # RB980BX )which is going on EBay at the moment would be Ok to drive a EBS 142Ltr Shiva, which is currently sharing a plate Amp with another Sub and it's a pain keep unpluging one to run the other ! Ideally I would...
Kevin Follow Dan's link and you can't go wrong ! My first DIY sub was the sealed 88litre Shiva and I highly recommend this Sub for music, and from a building point of view it was relatively straight forward to construct .
Am I heading in the right direction or not with ebs Shiva? All speakers calibrated to 75db using SPL meter! Now for the bit thats confusing me I have a disk of test tones that I can run, do I set the receivers output/volume to reference level to measure the subs response at the varying...
Thanks Tim and Allan, many thanks for your helpful relies and to everyone at this forum I have found it to be most helpful. It certainly is an interesting hobbie this DIY stuff. The sub sounds fine to me with heaps of what I percieve to be low down grunt.I have a SPL meter at home I will run...
Need advice I've just finished Adire Shiva 142litre EBS tuned to (hopefully) about 18hz with 20" 4.5" non flared port. Im powering this with a 350W plate amp brought from Jaycar here in OZ it states that it has a boost of 6db @ 35Hz, what affect will this have on sound etc ? Can it be disabled...
The Amp doesn't have to be attached to the cabinet you could if you want for simplicity and astetics make a seperate box for the amp and just run the outputs from the amp to where ever your sub is located
Stuart
Questions questions questions ! Looks like it all a bit hard to get bends for the 4.25 " port so as to give it suficient clearance . Would I be right in assuming that if I use a 4" PVC pipe for the port that the lenght for the Adire EBS alignment would be the twelve inchs as recomended from...
Am I right in assuming that given that there is not enough room in the box to have that lenght of port and still leave sufficient clearance that I can put a series of bends in the port ? Thanks
Hi All after living with a sealed 88 litre shiva for some time I've plucked up the courage to have a go at making the EBS alignment as per their web site . Only problem is this is! I am looking for some assistance is in the port size / lenght. In Oz it is very dificult to get the correct...