Search results

I bought a lot of headshells and cartidges off of ebay to get the ar-xa headshell that I needed, I dont need these other parts they are for sale. 2 Dual cs431 headshells they are in mint condition, I will take 8 bucks apiece for them and will ship them for the 8 bucks to anywear in the USA.I...

Thanks for your help, I cant wait to get a headshell and get tis old classic turntable up and running.

HI,I am looking for a factory plastic headshell to fit an acoustic research XA turntable, the one I have now is striped out were the headshell goes into the tonearm.Anyone have one of these laying around that they would like to sell. Thank you.

Thanks Kudret, I tried to downlowed it, but after an hour still nothing , maybe it takes a couple of hours or so. I dont have any of the manuals you are looking for, sorry, maybe one will come up on e-bay. CAN ANYONE ELSE HELP ME OUT.

Do you have any games to go with the gameboy color?

Hi, I just bought a scott 299a tube amp, I would like to buy a owners manual for it. Anybody have one for sale or know were I can get one?

Making a klipschorn, would takeing on one heck of a project,would be very hard to build unless you are one hell of a craftman. The lascalas or bell would be easier. The problem is the high price of the drivers and crossovers. In my opinion by the time you build them, buy all the divers and...

Nice job, looks great. If you can do this good of a job on a flexy rack, I am sure your sonotube will turn out perfect .

Thanks all, I new somebody would come through with a quick answer.

Hi all, I am about ready to hook up my ava250 plate amp to my tempest sonotube. I have a duel input cup terminal on my sonotube.Im going to take one side of the tempest + AND - and hook it to one set of the duel input cups + and - terminals. The other side of the tempest I will do the same and...

You should have got a allen wrench in you owners manual with your speakers. On the back of the bracket, you will see 2 small holes, inside of these holes are the allen screws, you need to tighten them up. Dont go real tight could strip them.My quintets have needed tighting up a few times...

Thanks for the quick reply dustin, OK a 23and a half inch long port. But what lenth do I cut the sono tube I have 6 feet of it. Around 44 inches. This way when I put the 4 or 5 inch legs on it I will be at about 4 feet.

Hi guys, I have all of the end caps cut for my 24 inch sonotube,a total of six of them.Im using the tempest driver, and a 6 inch pvc port.I am trying to use pat suns sonotube 2 as a close guide line.Fist of all I am going to put 2 3/4 inch endcaps into the top of the tube, and outside on the top...

What is the best tool to use to cut the sonotube, Jig saw, hand saw??????

Man do those sonotubes look good, I hope mine turns out half that good. thanks for the ideas on the covering, now to find one of those stores to get it from.Warrick how does that remote control plate amp work out with your tempest? I am mayby going to go with that plate amp on my tempest too, I...

Wear can I find material to cover the outside of my sonotube? What is it called and can I get it at walmart? I want the material in the color of black. THANK YOU.

You got mail.

Steve or anyone that is cutting up some mdf, wear a dust mask, the fine dust is bad for you, also wear goggles, this dust will get into your eyes, and do wear ear plugs, routers are very noisy. Steve if I were you I would cut the mdf outside and not in your garade,The dust can be cleaned up with...

Jim, thanks a lot I am more confident now then ever on building my own. great description on building this circle jig.Thanks a million.

Does anybody have any pictures of thier homade circle jig. I need to build one for my router to cut out some endcaps. THANKS.

Hi Pat, looks like you started on the outside of the mdf by the pictures on you sono2 project, This is the exact sub I am going to try to build, The sono tube is here, I need to get my router and Im going to try that spiral upcut bit.I might need some of your help on this project. YOU did well...

Thanks guys for your replys,can you describe how the best way to cut the end caps to my 24 inch sono tube. Do I just get a circle jig and my router and start out with maybe a 26inch piece of mdf and drill a hole in the middle of it and start my cut, or do I have to start on the edge of the mdf...

I need to buy a router to cut out end caps out of mdf, can I get by on a regular router or is a plunge router the way to go. And if I need to get a plunge router, will it do everything a regular router will do.Id hate to buy a plunge router for just a sonotube project and cant use it for any...

Hi, I am not sure on this, can an x-box vidio game system be hooked to my home theater system and be used as a dvd player? will it play back the dvds in dolby digital and dts? I have a dolby digital reciever with dts both are built into the reciever. Im just thinking about killing 2 birds with...

Thanks Tom, I might attempt to build this monster, if it sounds bad with my k-horns I could eventually use it in a home theater system with a differnt set of speakers. AS for the k-horns they will be with me for life, great speakers for 2 channel listening.

Ok, so there is no such thing as quick bass. The klipshorn has a good acurate bottom end that goes to 35hz. Most people on the klipch forum tell me it takes a good sub to match up with the k-horn. Sunfire signiture, svs, in that neighborhood, big buck subs for my pocket book. So I am asking If...

Rich, in my basement I have a drop ceiling which has about 1 foot of space to the kitchen floor. Might be possible to mount some type of IB there, but I think I would still be vinting the woofers back into the basement with the K- horns. Am I right on this?. Also the walls in my basement have 2...

Nope, that won't work k-horns are in the basement.

SO Dustin, your saying no way a tempest sonotube will work good with my klipschhorns.I was going to run the klischorns by themselves, I am not going to use the tempest sub and cross it over into the klipschorns. My plan if this would work, Im using an old sansui g-7700 reciever 120 watts per...

Hi everyone. Has anyone used a tempest single or duel sonotube with a set of klipschorns? Can the tempest sonotube keep up with the quick bass of the folded horn design of the klipschorn? I have a set of klipschorns and would like to add a sub to them, thinking of making my own tempest sonotube...