Did anyone else have a problem with the audio for the Jack-Jack Attack short? I have a Pioneer DV-563A, and if I use the digital out I get nothing but LFE, and I get no sound at all when I switch to the analog outs. I can only get sound by telling the player to downconvert the DD track to PCM...
Hello, Not quite sure where this thread belongs, but I'll post it here since it has to do with TVs. :) I'm looking at upgrading my current 32" CRT TV to something quite a bit larger, probably around 55-57" or so, rear projection CRT. However, I've got a Swan Diva C3 center channel that...
I've had a set of Divas (4.1/2.1/C3) for over a year now and love them to death. I haven't heard the Rockets, but I have no urge to upgrade. If you're interested in both models, take a look at AudioEnvy and see if you can arrange a local demo to see which ones you like best. Dave
Also remember with HK you have different speaker level settings for each input and (I think) each surround mode, so once you find a setting that works for your speakers you'll need to modify the inputs and modes that you use. Dave
Hello all, Got a question about my HK 520 and the 5.1/7.1 analog inputs... if I switch to either of those sources, what video signal does the receiver use, if any? Browsing through the menus, it doesn't look like there's a way to assign the 6/8 ch. inputs to a source... Thanks, Dave
Hello all, Right now I've got an HK 520 mated to an SVS 25-31PCi sub, with Diva 4.1 mains. In the next few months I'm looking at adding an integrated amp to my setup for purely 2 channel listening, but therein lies the problem... All of the units I'm looking at are analog only and have no...
My 520 had the shutdown problem when I had it hooked up to a cheap surge protector, it would shut off every time a major appliance kicked on (A/C, fridge, etc.). I replaced the cheapo surge with a Panamax DBS+5 and haven't had a single problem since... Dave
Tarry, My room is 22x13 with a 12ft. vaulted ceiling, open to the dining room(10x12x8). I am very happy with my 25-31PCi sub... I very rarely listen at full reference level, and the sub will more than fill the room with sound. If the PC Plus had been available when I bought my sub I think I...
Eujin, I have Swan Diva 4.1's as my mains. One question I have though is if I use an integrated amp, would I also be able to use a sub for the low bass? I have an SVS 25-31pci crossed at 100hz and I'd like to keep using it for music if possible... Dave
Eujin: I like the idea of the integrated amp versus just a preamp... my HK is excellent for HT but is somewhat lacking for 2-channel. What did you end up getting? There are some nice Jolida integrated amps at Audiogon, I'm thinking this might be a decent way to get into tubes... :) Dave
What about adding a 2 channel preamp to an existing receiver, using the receiver's amps? I have an HK AVR 520, and would like to improve my 2 channel performance... what's the best method to accomplish this? I'd like to use my existing speakers (Swan Diva 4.1's) but still be able to have good...
Jose, No, you can test for the bug without opening the unit if you have a 520, since it has Main Inputs. There are jumpers connecting the main ins to the corresponding preouts on the back of the unit, so you can disconnect one and use that main input to power the SBR channel temporarily. I...
Mine has the bug, manufactured in Feb. 2002... I do get some sound from the SBR channel, but it's all low frequency. I'm planning on calling them about it this week. For those that have the 520, you can test for the bug by disconnecting the jumpers from one of the channels (I used the FR and...
I had the shutdown problem when I first got my HK 520 and I solved it by getting a Panamax DBS+5 surge protector. The unit used to shut off when my A/C kicked on, but I haven't had a single problem since I got the Panamax. Dave
I had family over last weekend to watch FOTR on my setup (SVS 25-31PCi, Swan Diva 4.1/2.1/C3). Popped in Toy Story 2 as a "demo" first, cued up the first chapter, and hit Play. FWIW, "reference" level with this DVD shakes my couch and causes many objects in the room to resonate (gotta fix that...
Max,
I have an HK 520, and I did have the shutdown problem described here... I'm almost certain it has to do with the power at my house, because the unit often shut off after my AC turned on. I've also noticed that any major appliances (HVAC, dryer, etc.) cause audible "pop" sounds on the line...
Jeff, The HK has independent settings for each input, and for each surround mode. In order to see settings for more than the front L+R speakers, you need to select a surround mode other than stereo. When I set up my HK 520 for Dolby Digital/DTS, I just fired up a DVD and made sure the...
John, I have an HK 520, and I tested it with a few CDs just now. I noticed that at the very beginning of each disc there was a 1/4 second dropout, and I can hear a very slight pop from my speakers when the PCM indicator lights up. Also, between tracks there is also a very slight pause (most...
Dave: Do you see any lights on the receiver at all? If it's plugged in, you should see an orange LED on the lower left side indicating it's in standby mode. If that's not lit, make sure you hit the power button right above it. As for your TV, have you selected the correct input? Sounds...
Jeff, I've had my SR60's for 3 years, and they are one excellent pair of headphones... I'm still amazed at the clarity and detail they have, and the bass is quite good as well. In my experience they do well when plugged into a computer, or directly into a receiver (I have mine plugged into an...
Thanks for all your suggestions... :)
I think I've tracked down the problem to the splitter I'm using to attach my VCR and TV to the CATV line. With the splitter removed the hum is still present, but it's not nearly as noticeable. I'd have to be right up next to the speaker or have my sub...
Anthony, I do in fact have CATV, hooked up into a splitter between my TV and VCR. I unhooked the connection at the wall, and I still have a hum... Thanks, Dave
Hello all,
Got a problem with my setup that is getting really annoying. Basically, with no signal I have an audible hum across all of my speakers, sub included. Even with all my sources disconnected (save for the 5 speakers), the hum is still present. My receiver (HK 520) was previously...
Pablo: Thanks for the advice... I'll check out those JBLs!
Martice: My folks are more into movies than music. They do have a pretty big DVD collection and they have talked about getting some form of surround sound for a while. I think given the room layout it would be pretty difficult to place...
Hello all,
I'm planning on buying my parents some speakers in the next few months to finish out their HT, and I need some advice. First off, I'll attach a pic of their current room setup:
link
As you can see, it's not the best room to work in. All of the walls except for the fireplace are...
JacksonWright: Hehehe... I wasn't really serious about selling it... :D I'm very impressed with what I have, and if I get another it will probably be a second 25-31 to go with the first... :)
Dave
Kimmo,
Yeah, I had my doubts, but it definitely made a large difference in my case. When I had it reversed I got some sound, but it mostly just caused the objects in the room to resonate. After reversing it I don't get any of that excess resonance, just good, clean bass.
Here's a link to the...