a) I waited a year for a box from ATT Broadband with the S-VHS and digital audio connections. I just stopped by my local cable office once a month or so and asked. Finally, last week, I got lucky and traded in by digital box for one with S-VHS output, coax digital out, and optical out. The lady...
The 4 dB "error" on the Radio Shack meter is not just a myth. In their instructions to recording engineers setting levels in a Dolby Digital mixing studio with an SPL meter, Dolby recommends setting the subwoofer level so that it reads 4 dB low on the meter -- i.e. if you are aiming for a 75dB...
On the original question between Dolby Digital and DTS: It is quite common for DTS recordings to be 4 dB louder than Dolby Digital. The most likely explanation is that Dolby's dialog normalization feature reduces the level of any recording that used the default setting when encoded. DTS does...
>> I am starting to feel that the Yamaha is the safer buy as it will probably perform better, last longer and have more features. But is all of this worth doubling the price from 400 to 800 Canadian dollars?
No. The Yamaha is probably a little better receiver than the Pioneer. But, it will be...
As long as you run all the speakers as SMALL with the hi-pass crossover and don't try to play movies at full Dolby reference levels, you should be fine. Normal, fairly loud, movie playback at 6 to 10 dB below Dolby reference levels can be achieved without to much sweat by 50 to 75 watts a...
Heh, heh. I'd lose the $100 bet, too!
Years ago when I peddled hi-fi, I used to laugh at all the people I sold Soundcraftsman and MXR equalizers to. They'd come back in and tell me how they boosted 3000 hz or whatever. They didn't anymore know what 3000 hz sounded like than the man in the...
Marcus:
Going to a lower crossover isn't going to buy you anything. 100 Hz is fine.
In your case, it would be going backwards. You have a system with far more power than you need on the subwoofers and not enough power your other five speakers. So to go to a lower crossover point and decrease...
No problem. Your note that you had the subwoofer setting at full minimum was the dead giveaway. I don't know why I didn't think of that sooner -- it just took a while for me to come to full grips with your dual sub 1000 watt rig and the implications of that much gain on balancing the system...
When you read the British hi-fi mags, you have to put things in context. Of course they don't like the sound of the amplifiers in a cheap surround sound receiver. Who would?
For context, read their review of the more expensive Onkyo surround receiver:
I have a Pioneer 810. Frankly, for the $300-something I paid for it, I think it's a very impressive piece of gear. I say that from the perspective of someone who has never been a fan of Pioneer receivers. But, it works as advertised and has sufficient control options to configure a very good...