Search results

I'm wanting to hook a microphone up to my HK AVR 325 so my 3 year old can play "Rock Star". Is this possible and if so any tips on how or types of mics and where to get them would be very much appreciated.

Thanks for the replies. What are the pro's and con's, if you don't mind me asking?

I'm ready for an upgrade in my front 3 speakers in my sound system. I think i've narrowed it down to the a/v3 or adires new 61 kit. They will be used 50/50 HT/music. One concern is my HK AVR325's 50 wrms power rating. I'm not sure it would be enough for the 61's. I'm leaning toward the 61's for...

I wonder if there would be an audible difference between it and the original? I'm kind of disapointed since I still haven't had a chance to build an enclosure for mine yet, and now there's already an upgraded version for the same price. C'est la vie.

Finally got my Rythmik amp for my AV15 and wanted to test them out. I wired up the AV15 to the amp in series to the amp. AV15 is running fee-air. So I put in bass cd with gains turned down and raise it slowly half way. No probs. Everythings is going fine at this point. Then I put in LOTR/FOTR. I...

http://snippets.org

Here's what Adire had to say about the 3 way's their developing: "Gary, Thanks for the e-mail! The kits are designed and ready to go; we're waiting on receiving the last few crossover parts (inductors were backordered from Solen), and then we can start selling and shipping them. Thanks...

Adire does have a 3 way tower in the works, to match their LCC. I'm waiting on that to come out before I make my final decision. Originally Adire was shooting to have it available in March, but then they moved to their new location. I amagine since the Tumult is just now being shipped it will be...

I decided on the 325 over the 525. After inquiring I was told there would be less than 2 db diff between the 2. So I saved my money and have been happy.

I tried to do a search but this place is too busy, wouldn't let me do it. Anyways, I've got the album but I'd rather have the series but can't find it anywhere. Any info appreciated

Actually here is a reply from him: I had no idea the AV15 and AV12 would be so popular. The preorder went slower than expected, but after it was over, everyone wanted one. I ordered about 50 extra woofers, hoping they would last a month or so until I could get more in. They all...

I tried to order an AV15 on the 3rd only to find them out of stock. However, he is willing to extend the pre-order price if he get's 60 units total pre-ordered(12's and 15's) so he can place a purchase order. If your interested contact John through www.stryke.com.

Well, I ordered my AV15 too late I think (out of stock) so if I didn't get one then put me down for at least 1 15". Actually as an entrepreneur I can really sympathize with financial limitations right now(darn economy).:frowning: I kind of feel bad being so critical without having all the...

I'll tell you my opinion of this price and customer service debate we have going. I have owned a retail wine and spirits shop here in Tulsa for 11 years now and I can tell you that if I have a price on a bottle, even if it was mispriced (which happens way to often) to where it less than cost, I...

I went ahead and ordered an AV15 even though I didn't get a call back from the message I left on the answering machine. The em confirmation I recieved from my order stated $165 with no mention of shipping charges, so I assume it's $165 total. I hope it's not terribly long before I recieve it. It...

The em confirm. says $165 also. If that's not what they charge me I'll be be giving them a call.

just ordered it at $165, apparently, according to website.:)

By tone I meen bass and treble setting. I have my HK325 bass and treble set about 3/4 with the treble about 10% more. I had it flat and it just didn't sound right to me. Depending on the source I adjust it sometimes(wish I could do it via remote).

I can't get a quick reply from them before the price goes up so I'll ask you guys. Would a 380 watt plate amp be sufficient for the AV-15 in an EBS alignment, or should I stick with a Tempest since it only needs 250 watts to reach excursion?

I run 4ohm mains on my 325 with no prob. It get's fairly hot but it hasn't shut off yet, plus I only have about 2" clearance from the top 1" to the right but open to the back and left.

Here's an idea. Mention in passing to your wife that the room is stuffy. Build an IB box install drivers where it's all ready to go, including the trim and grille. Make shure the grille resembles an air return vent. When the wife goes out slap the IB up real quick. If she notices when she...

I've em'd Adire a month ago about the 3 way tower to match the LCC. They said around March for the release.

We have a Harbor-Freight store here in Tulsa that has the same sale for the same style clamps. I checked their website and only the 36" is on sale there for some reason.

If I remember corectly the sub with the guy standing beside it (Richard Clark) was powered by more than 12,000WRMS and was put in a delivery truck which was sealed in the back for an enclosure. Supposedly the sheet metal on the truck buckled when they fired it up, so it wasn't up and running for...

If you're going to get worked up about a subwoofer at least make it worthwhile. Try this: http://www.carsound.com/ubb/ultimate...c;f=1;t=019890 If your going to dream, dream BIG :)

I have a HK AVR325 coming from JandR.com. I paid $550 for it shipped, but I ordered it on the 23rd so the shipping was free. Also they are an authorized dealer which was important to me.

I am planning an Adire home theater setup with the LCC and their matching 3 way towers when they come out as well as a set or 81's for surrounds. I just returned a Harmon Kardon AVR520 (75W x 5) for the reason that many here were having probs with them, and am replacing it with the HK AVR325...

I got the closeout price of $500 for the HK AVR520 at J&R which is now enroute. I'm using it for 50/50 HT music but bought it before knowing anything about HT. Now I have learned that the majority of action movies are using DD EX which the 520 won't decode. How big of a diff is there between DD...

What line conditioner is it your having luck with? One ofe these would be a good idea anyway.

what's your setup and settings for the speaks