Search results

I am deciding on what would be the largest screen I can use with the JVC DLA-RS1? I am looking for a few suggestions. The rooms dimensions are 16'x16'x8' Currently the walls and ceiling are medium/dark flat slate grey with a darker bluish carpet. Ambient light is totally controlled...

Hello, My viewing position is an adjustable queen size bed. I have been using tactile transducers in my system for years. I started out with an array of 10 RBH units. Then used a pair of Clark Synthesis models for about a year. These were mounted directly to the underside of the bed which...

Should I be concerend with HDMI v1.3? Are there any 65" and larger sets available now that are HDMI v1.3 ready under $8K?

I need to replace the monitor in my bedroom system. Currently I am using a Mitsubishi WS-65813 I would like to stay with a 65" screen. The room has total light control. I was going to look at the WS-65831. What others should I add to the list? Thanks, John

Bedroom Theater John

I have speaker and subwoofer cabinets that are piano gloss black. Would applying a coat of wax harm the finish? Does it have to be a furniture wax? The reason I ask is that I have some high end carnauba paste automobile wax that is $103.00 an oz. Thought I might apply a coat. John

A pair of Velodyne HGS-18's in the bedroom. John

Duel Velodyne HGS-18's and 4 original Buttkickers in a 2048 cu ft room. Satisfied John

Marv, Thanks for the compliment on my system. Yes that is my only HT system. I started out with a moderate DPL system in the bedroom several years back and the HT has never left the room. John

I have been using tactile transducers in my system for over 5 years. I use them to activate a queen size adjustable bed in a bedroom based system. My first installation was an array of 10 RBH FX-80 units. (ultra high performance Aura's) A year later I replaced the entire array with a pair of...

I have been using tactile transducers in my bedroom based system for over six years. For the last few years I have been using 4 platform mounted 'original' Buttkickers driven by 2 bridged Crown K2 amplifiers. A 20Hz 24dB per octave lowpass filter is used on their signal. They are used in...

Mike, If your are considering the BK contact Marvin Clamme at the Guitammer Co. He is the tech and will answer all of your questions. [email protected] John

I have been using tactile transducers in my system for 6 years. I use them to activate a queen size bed in a bedroom based system. I have used RBH (ultra high performance Aura's), Clark Synthesis 329F and Platinum models and currently use 4 platform mounted original Buttkickers driven by a...

The 1500w specification is most likely the maximum AC current draw. Contact Chet at Definitive Technology to confirm. [email protected] John

Depending on your installation you may not need or want to drive your TT's to their maximum. You want them to blend with your subwoofer and not be a distraction. FMOD Crossover 50Hz lowpass Stack the pair if you desire a steeper slope. John

I have read Aura users suggesting the 50Hz lowpass FMOD crossover. Stack a pair if a steeper slope is desired. John

I am currently using a Monster HTPS 7000. Only the Audio Filter and Digital Filter banks supply balanced AC power. The Video Filter and High Power outlets do not. I was looking at a Furman IT-1220 which supplies balanced power to all outlets. Would there be a benefit to replacing the 7000...

I have been using tactile transducers in my system for at least 5 years. My first TT arrangement was an array of 8 RBH FX80 units. (ultra high performance Aura's). I used these for over a year and then upgradded to a pair of Clark Synthesis 329F's. A year later I stepped up to their Platinum...

Alex, Also your Definitive Technology BP2006 has an efficiency rating of 92dB not 86dB And as Peter pointed out the internal powered woofer section will take a load off the main amplifier. John

Jerry, Yes, I received this information from Parasound when I purchased a used HCA-2003 and inquired about the differences. I don't know about the HCA-1000/HCA-1000A but I assume they would be the same. John